A range of separator/filters (up to 5,500 cfm) for complete removal of liquid condensates, pipe scale, rust and dirt. Fitted with a 304 stainless steel element, the Eliminex® uses inverse flow technology to eliminate condensed liquids and particles to 3µm with negligible pressure drop.
For best results the Eliminex® separator/filter should be installed downstream of an aftercooler or at least 8 metres from the compressor.
All Eliminex® separators are fitted with an automatic drain valve.
Pressure: 14 bar max
Temperature: +65 deg C
Pressure drop: <1 psi at 100 psi (at recommended flow rate)
ISO8573.1: particulate class 3 (see engineers data section for a breakdown of ISO8573.1 numbers)
When selecting a separator choose a unit where the flow required is approximately 50% of the maximum in the table below.
* Flange unit - design - RFSO